More Floor

Here are some pictures from the inside of the new floor. It is 1/2 inch plywood instead of the 3/4. This is because I need to lift the camper to clear the rails on my F150. I am building a drawer box under the floor to raise the camper. The logic is that having separate pieces will make the camper more flexible in the future if I get a different truck and need to change the hight
This picture is just the camper sitting on the floor, but not secured. I needed to determine the best way to attach the floor. Since the sides are 1/2" I was not real keen on screwing stainless deck screws into the walls.